Gaugemaster DCC

DCC01 Gaugemaster Prodigy Express DCC Digital Control System For a newcomer to DCC or for the operation of a smaller layout, this system is a great choice. Comprising of a Base Station, Walkaround, and Power Supply, this system is packed with features but is above all, incredibly easy to use and allows you to run your railway without fuss. With 1.6 amps, there is enough power to keep things intere…

Gaugemaster DCC02 Prodigy Advance2 Starter Package Replaces the DCC01 with upgrades such as new NMRA 28 function protocol. All you need to get started in DCC Digital. The Prodigy Advance System includes Power Supply Base Station & Walkaround with interconnecting cables. After two years of careful research and consideration, GAUGEMASTER have chosen and developed the DCC system to best suit the need…

Gaugemaster DCC06 Prodigy Express WiFi Digital Control System For a newcomer to DCC or for the operation of a smaller layout, this system is a great choice. Comprising of a Base Station, Walkaround, and Power Supply, this system is packed with features but is above all, incredibly easy to use and allows you to run your railway without fuss. With 1.6 amps, there is enough power to keep things inter…

2 Port extension plate which can be used to create plug-in locations around your layout for the DCC02 Prodigy Advance Walkabout unit.

Gaugemaster DCC32 Point Motor Decoder With CDU 4 Way (Twin Pack) Simple point motor decoders for Standard solenoid point motors, 2 wire main track or bus connection minimize wiring. As two separate units these avoid the need for long wire runs and the super easy learning decoder requires no special programing when addressing. Key Features • Dual Pack 2 x 4 way Solenoid Point Decoder • Easy setup u…

Gaugemaster DCC63 Prodigy Advance Power Supply Unit Switch mode power supply (SMPS) for use on our DCC02 and DCC04 Prodigy systems as well as a variety of other manufacturers products where a SMPS is required. Please use the DCC64 Mains Cable with this transformer. Voltage: 15v DC Current Rating: 3.5A

PC1 Train Tech Single Point Controller This module enables you to quickly and easily control one of the most popular 2-position 12-16V point motors, eg Peco, Hornby etc Some semaphore signals can also be controlled by point motors. Like all of our DCC modules it takes all of its power from the standard 2 wire DCC track or controller output and it has a built in CDU which helps give the point motor…

This module enables you to quickly and easily control up to four of the most popular 2-position 12-16V point motors, eg Peco, Hornby etc Some semaphore signals can also be controlled by point motors. Like all of our DCC modules it takes all of its power from the standard 2 wire DCC track or controller output and it has a built in CDU which helps give the point motors a good boost of power without…

Train-Tech RL1 Twin Channel Relay Controller For DC & DCC DESCRIPTION This is a twin channel Relay controller which can switch high power loads using control signals from Track Sensors, Mimic Switches, Sensor Signals or DCC accessory commands. Example applications include: • Start a coal loading conveyor when the train is in position • Remote control of models from the DCC controller • Activate a…

Train-Tech SC3 DCC Dual Signal Controller for x2 Dapol Semaphore Signals The SC3 controls one or two Dapol N or OO gauge motorised semaphore signals by DCC. Each signal can be given a separate DCC address with their position controlled by the SC3. The signals connect directly using their wires and no modification or power supply is required. (Please note the signals pictured are not included and a…

Train-Tech SC4 Dual Dapol Servo Semaphore Signal DCC Controller Description Powers and controls two New Dapol Servo type Semaphore Signals from DCC The SC4 is specifically designed to power and control the new Dapol Servo controlled signals which have three wire inputs for each signal. An SC4 can control one, two or a twin head (e.g. Bracket) servo signal and each can easily be assigned any DCC ac…

Train Tech SC400 DUAL DAPOL Servo Signal Control & Water Crane Plus Automation The SC400 is specifically designed to power and control the new Dapol Servo controlled signals which have three wire inputs for each signal. An SC400 can control one, two or a twin head (e.g. Bracket) servo signal and each can easily be assigned any DCC accessory address & run the two arms independently or together in H…