Gears

Micromotor.eu G0.4-3.6-3.5-7T Worm Gear M0.4 D=Dia 3.6 L=3.5 DI=1.5 mm 7 Teeth (Marklin Ratio but the hole size may differ to the original brand). Micromotor Products Are Designed With a -0.0 + 0.05 mm Tolerance To Be Glue Fitted NOT Friction Fitted. Recommended Is: Loctite 603 Retaining Compound.

Micromotor.eu G0.4-4-3.5-8T Worm Gear M0.4 D=Dia 4.0 L=3.5 DI=1.5 mm 8 Teeth (Marklin Ratio but the hole size may differ to the original brand).

Micromotor.eu G0.4-4.4-3-9T M0.4 D=Dia 4.4 L=3 DI=1.5 mm 9 Teeth (Fleischmann)

Micromotor.eu G0.5-5-2-8T Worm Gear M0.5 D=Dia 5 L=2 DI=1.5 mm 8 Teeth (Lima Ratio but the hole size may differ to the original brand). Micromotor Products Are Designed With a -0.0 + 0.05 mm Tolerance To Be Glue Fitted NOT Friction Fitted. Recommended Is: Loctite 603 Retaining Compound.

Micromotor.eu G0.5-6-3-10T Worm Gear M0.5 D=Dia 6 L=3 DI=1.5 mm 10 Teeth (Fleischmann Ratio but the hole size may differ to the original brand). Micromotor Products Are Designed With a -0.0 + 0.05 mm Tolerance To Be Glue Fitted NOT Friction Fitted. Recommended Is: Loctite 603 Retaining Compound.

Micromotor.eu G0.5-7-3-12T Worm Gear M0.5 D=Dia 7 L=3 DI=1.5 mm 12 Teeth (Fleischmann Ratio but the hole size may differ to the original brand). Micromotor Products Are Designed With a -0.0 + 0.05 mm Tolerance To Be Glue Fitted NOT Friction Fitted. Recommended Is: Loctite 603 Retaining Compound.

Micromotor.eu G0.5-8-3-14T M0.5 D=ø8 L=3 DI=1.5 mm 14 Teeth (Fleischmann)

Micromotor.eu PG0.5-4.5-5.5-7T Gear M0.5 D ø4.5 L 5.5 DI 1.95 mm 7 Teeth (3 Pcs) Plastic Micromotor Products Are Designed With a -0.0 + 0.05 mm Tolerance To Be Glue Fitted NOT Friction Fitted. Recommended Is: Loctite 603 Retaining Compound.

Micromotor.eu PG0.5-5-5-8T Gear M0.5 D ø5 L 5 DI 1.45 mm 8 Teeth Jouef (3 Pcs) Plastic (Jouef Ratio but the hole size may differ to the original brand). Micromotor Products Are Designed With a -0.0 + 0.05 mm Tolerance To Be Glue Fitted NOT Friction Fitted. Recommended Is: Loctite 603 Retaining Compound.