Skip to content
Following some recent updates to the site, some customers will need to create a new account with the same email address as previously used. The new account will connect to your previous details and history.
Our Staff Fast & Friendly Call for advice

Accessories

Peco GR-105 Close Couplings (Pk12) OO9 Gauge Peco GR-105 Close Couplings (Pk12) OO9 Gauge
£6.00
£5.34
10 in stock
These semi-permanent close-couplings fit in the NEM pockets on all our 009 rolling stock. They can replace the conventional 009 hoop-and-loop couplings by pulling them out with fine nosed pliers. Our slate wagons sets GR-320 and 321 are already fitted with these closer couplings; spare conventional 009 couplings are included with them to enable them to be coupled to a loco etc.
Peco NR-100 Disc Wheels On Axles 4 Axles (8 Wheels) N Gauge Peco NR-100 Disc Wheels On Axles 4 Axles (8 Wheels) N Gauge
£3.65
£3.25
12 in stock
Peco NR-100 Disc Wheels On Axles 4 Axles (8 Wheels) N Gauge These Are Plastic Wheels on Plastic Axles. (Aprox 6mm)
Peco NR-102 ELC Couplings With Pockets (PK4) N Gauge Peco NR-102 ELC Couplings With Pockets (PK4) N Gauge
£2.75
£2.45
12 in stock
Peco NR-102 ELC Couplings With PocketsĀ (PK4) N Gauge To Work With Peco PL-25 Electromagnetic Uncoupler
Peco NR-103 Coupler Lift Arms (PK32) N Gauge Peco NR-103 Coupler Lift Arms (PK32) N Gauge
£3.40
£3.06
3 in stock
Peco NR-103 Coupler Lift Arms (PK32) N Gauge
Peco PL-10 Turnout / Point Motor (Switch Machine) Peco PL-10 Turnout / Point Motor (Switch Machine)
£8.95
£8.05
6 in stock
Peco PL-10 Turnout Motor (Switch Machine)
Peco PL-1000 Pecolectrics TwistLock Turnout Motor Peco PL-1000 Pecolectrics TwistLock Turnout Motor
£15.76
£14.02
Out of stock
Peco PL-1000 Pecolectrics TwistLock Turnout Motor TwistLock is still a basic electric solenoid motor, for operating (in the main) turnouts. It is powered by a normal 16vDC supply (and can take up to 3 amps) and is fully compatible with all PECO turnouts up to O gauge (and can handle many other proprietary brands too). But no longer will any soldering of wires to the terminals be necessary, nor the…
Peco PL-1001 Pecolectrics TwistLock Turnout Motor + Microswitch Peco PL-1001 Pecolectrics TwistLock Turnout Motor + Microswitch
£22.25
£19.80
2 in stock
Peco PL-1001 Pecolectrics TwistLock Turnout Motor + Microswitch TwistLock is still a basic electric solenoid motor, for operating (in the main) turnouts. It is powered by a normal 16vDC supply (and can take up to 3 amps) and is fully compatible with all PECO turnouts up to O gauge (and can handle many other proprietary brands too). But no longer will any soldering of wires to the terminals be nece…
Peco PL-1005 Pecolectrics TwistLock Microswitch Peco PL-1005 Pecolectrics TwistLock Microswitch
£8.50
£7.65
3 in stock
Peco PL-1005 Pecolectrics TwistLock Microswitch
Peco PL-10E Turnout / Point Motor With Extended Pin (Switch Machine) Peco PL-10E Turnout / Point Motor With Extended Pin (Switch Machine)
£8.95
7 in stock
Peco PL-10E Turnout Motor With Extended Pin (Switch Machine)
Peco PL-11 Side / Surface Mounting Turnout / Point Motor Peco PL-11 Side / Surface Mounting Turnout / Point Motor
£11.25
£10.25
8 in stock
Peco PL-11 Side / Surface Mounting Turnout Motor (This motor is not suitable for 009 points).
Peco PL-12 Turnout / Point Motor Adaptor Base Pk1 (With Spring) Peco PL-12 Turnout / Point Motor Adaptor Base Pk1 (With Spring)
£4.50
£4.00
6 in stock
Peco PL-12 Motor Adaptor Base x1 (With Spring) should be used in association with most non-PECO turnouts, where the over-centre spring feature is not available. It can be affixed above or below the baseboard, and give the modeller the ability to "lock" the point blade in either position when used in conjunction with the PL-10 Turnout Motor.
Peco PL-12X Turnout / Point Motor Adaptor Base Pk2 (Without Spring) Peco PL-12X Turnout / Point Motor Adaptor Base Pk2 (Without Spring)
£2.95
£2.63
5 in stock
Peco PL-12X Motor Adaptor Base x2 (Pack Of 2) (Without Spring) is ideal for modellers wishing to use the accessory with PECO turnouts. It will be especially useful in providing the means with which to mount a PL-10 Turnout Motor above the baseboard. The simple assembly of the base coupled with the omission of the spring (which is not required as PECO turnouts already "lock" into position with the…

Hello,

We are very sorry, but the browser you are visting us with is outdated and not complient with our website security.

Please upgrade your browser to a modern secure version to view our website.