DCC Sale

DCC Concepts DCD-GS-MG Mimic Ground Signal Add on Pack (Pk12) - UK 4 Light 12x 2-wire 4 LED UK Modern Ground Signal – A pack of 12 x 4-lamp plug and play signals in 4mm scale (OO), supplied with NO control board. The DCD-MGS-MG is a modern UK 4-lamp ground signal that uses LEDS in the prototype. It was first introduced around 2000 and is now being used to replace many 3-light signals as they reach…

DCC Concepts DCD-GS-RG Mimic Ground Signal Add on Pack (Pk12) - UK 2 Light 12x 2-wire Red/Green Ground Signal – A pack of 12 x 2-lamp plug and play signals in 4mm scale (OO), supplied with NO control board. The DCD-MGS-RG is a simple design 2-lamp ground signal that was first seen on a limited basis in the 1920’s in the UK, but it was very widely used internationally. (This can be pulled up on the…

DCC Concepts DCD-LZX Cobalt Alpha Adapter Lenz The DCD-LZX is an adapter that translates the communication language of Cobalt Alpha to allow you to interface it directly with a LENZ DCC System. It is very simple to install -simply connect it to Cobalt Alpha, and then plug the other end into your Lenz DCC system command bus / X-bus.

DCC Concepts DCD-MGS-RG Mimic Ground Signal Pack (Pk12) & Controller- UK 2 Light ALPHA MIMIC 12x Red/Green Ground Signal – A pack of 12 x 2-lamp plug and play signals in 4mm scale (OO), complete with control board and accessories. The DCD-MGS-RG is a simple design 2-lamp ground signal that was first seen on a limited basis in the 1920’s in the UK, but it was very widely used internationally. (This…

CC Concepts DCD-MGS-US Mimic Ground Signal Pack (Pk12) & Controller- USA 2 Light ALPHA MIMIC 12x US-type Ground Signal – A pack of 12 x 2-lamp plug and play signals in HO scale, complete with control board and accessories. The DCD-MGS-US is a simple design 2-lamp ground signal – the prototype for this signal dates from pre-WW2 but has not changed significantly since then. It is commonly used in th…

DCC Concepts DCD-SA3-LG.3 Zen 3-Wire Large Stay Alive for Zen Black & Blue+ Decoders (3-Pack) A set of 3 large Stay-Alives with 3-wire connections to the decoder. Totally Plug and Play with Zen decoders. Usable with Zen Black, Zen Blue+, Lenz and ESU or any decoder with three-wire connections for Stay-Alive. Height 6mm Width 14mm Length 22mm Please note that connection of a DCCconcepts Zen Stay-Al…

DCC Concepts DCD-SA3-SM.3 Zen 3-Wire Small Stay Alive for Zen Black & Blue+ Decoders (3-Pack) A set of 3 small Stay-Alives with 3-wire connections to the decoder. Totally Plug and Play with Zen decoders. Usable with Zen Black, Zen Blue+, Lenz and ESU or any decoder with three-wire connections for Stay-Alive. Height 6mm Width 14mm Length 6mm Please note that connection of a DCCconcepts Zen Stay-Ali…

DCC Concepts DCD-SA3-SS.3 Zen 3-Wire Super High-Power Stay Alive for Zen Black & Blue+ Decoders (3-Pack) A set of 3 SUPER Stay-Alives with 3-wire connections to the decoder. Totally Plug and Play with Zen decoders. Usable with Zen Black, Zen Blue+, Lenz and ESU or any decoder with three-wire connections for Stay-Alive. Height 6mm Width 14mm Length 32mm Please note that connection of a DCCconcepts…

DCC Concepts DCD-SAA-3W Zen 3-Wire Stay Alive Variety Pack for Zen Black & Blue+ Decoders A set of 4 Stay-Alives with 3-wire connections to the decoder. Totally Plug and Play with Zen decoders. 1x Small 1x Medium 1x Large 1x Super Usable with Zen Black, Zen Blue+, Lenz and ESU or any decoder with three-wire connections for Stay-Alive. Please note that connection of a DCCconcepts Zen Stay-Alive to…

DCC Concepts DCD-ZBHP.6-3 3x Zen Black Decoder: O and large scale. Fully protected. 3-5 amps reliably. 6 fn. Built-in high power stay alive Decoder features: – 5 Amps peak power – 3 Amps continuous power – 6 functions at 250mA each – On-board high-power stay-alive – 42mm x 27mm x 13mm – 12 screw terminals – One-Step Loco Setup – Shuttle mode (requires ABC boards for this to function) Zen decoder s…

Zen Black Decoder: Universal easy to fit 8-pin direct decoder with 6 functions. Includes 1x ABC module. Zen decoder software has always been smooth, clever and easy to use but our new BLACK decoder range takes this to a new level, with extended and improved automatic braking and shuttle abilities, simple-to-use ONE step locomotive set-up and advanced brown-out protection. All of our decoders are t…

DCC Concepts DCM-RRO.4 Rolling Road 4 Axle O Gauge Premium O Gauge Rolling Road Our O Gauge Rolling Road is designed to be very easy to use and exceptionally reliable. We use only high quality materials so you can expect many years of trouble-free use. Installation and use. DCCconcepts Rolling Road works well with AC. DC & DCC. O scale locos come with varying wheelbases, and it can be hard to hold…