ESU 58410.S0177 LS V5 Class 37 Diesel DCC Sound Decoder 8 Pin (U Drive) South West Digital

Code: 58410.S0177
£112.99
  • Temporarily Out of stock
For all stock enquiries relating to this product please enter your email address below:

ESU 58410.S0177 LS V5 Class 37 Diesel DCC Sound Decoder 8 Pin (U Drive) with South West Digital sound.

With Sugar Cube Speaker 15 x 11 x 3.5 mm 8 Ohm With Integrated Various Height Sound Chamber Kit. (The Chamber MUST Be Used OR The Sound Won't Function Correctly.)

(PLEASE NOTE SOUND DECODERS ARE THE RECORDINGS OF THE MENTIONED LOCO(S), YOU MAY NEED TO CHANGE THE SPEAKER TO FIT THE LOCO YOU ARE INSTALLING IT IN, SO PLEASE CHECK FOR AVAILABLE SPACE OR ENQUIRE BEFORE BUYING.)

F0 Lights On/Off

F1 Multi Start (Slot 1)

F2 Horn 1 (Slot 3)

F3 Horn 2 (Slot 4)

F4 Air Dump (Slot 22)

F5 Drive Hold

F6 Couple Up (Slot 8)

F7 Uncouple (Slot 7)

F8 Brake 1 (CV179)

F9 Flange Squeal (Slot 15)

F10 Spirax Valve (Slot 9)

F11 Guards Whitle (Slot 10)

F12 Coast

F13 Aux 1

F14 Aux 2

F15 Auto Uncouple ccle

F16 Master Volum, Toggle On/Off to change or leave to mute

F17 Aux 3

F18 Aux 4

Auto sounds Compressor, Pump (Slot 19), Brake (Slot 13)

From the ESU Web Site:

The LokSound V4.0 recognises DCC, Selectrix® and the Motorola® protocol. It can be operated with 14, 28 or 128 drive steps or on analogue DC layouts in DCC mode.You can assign the decoders to 2-digit, 3-digit (1-127) or 4-digit (1-9999) addresses as well as a consist address.

LokSound V4.0 decoders are also able to operate on analogue DC and AC layouts.

Constant current of 1.1A continuous current.

The LokSound V4.0 works with 8 polyphonic channels, i.e. that the decoder is able to play up to 8 different sounds simultaneously, using the 16-Bit mixer and the nearly noiseless D/A convertor.

Function outputs: 4 amplified outputs max. 250mA load for each output