ESU 82430 V4 GWR Castle / King Steam Loco DCC Sound Decoder 8-Pin South West Digi (U Drive)tal
- 1 in stock
ESU 82430 V4 GWR Castle / King Steam Loco DCC Sound Decoder 8-Pin South West Digital (U Drive)
(PLEASE NOTE SOUND DECODERS ARE THE RECORDINGS OF THE MENTIONED LOCO(S), YOU MAY NEED TO CHANGE THE SPEAKER TO FIT THE LOCO YOU ARE INSTALLING IT IN, SO PLEASE CHECK FOR AVAILABLE SPACE OR ENQUIRE BEFORE BUYING.)
DCC Sound Decoder 8-Pin with South West Digital sound
F0 Brake Whistle (Slot 4)
F1 Sound On/Off (Slot 1)
F2 Whistle, Playable (Slot 3)
F3 Ejector (Slot 14)
F4 Blower (Slot 21)
F5 Shovelling Coal (Slot 5) / Aux 1 (Fire Box LED)
F6 Safety Valve (Slot 12)
F7 Injectors (Slot 20)
F8 Drain Cocks (Slot 2)
F9 Flange (Slot 15)
F10 Drive Mode (Light ot Heavy)
F11 Guards Whistle (Slot 10)
F12 Ejector Fart (Slot 17)
F13 Coupling Clank (Slot 8)
F14 Aux 2
F15 Uncoupling Cycle
F16 Master Volume Control, Toggle On/Off To Change Or Leave On For Mute
F17 CV 3/4 On/Off
F18 Shunt Mode
F19 Lights On/Off
Auto Sounds, Steam Hiss (Slot 24), Intelli-brake (Slot 13)
NOTE: F15 WORKS GREAT WITH KD COUPLINGS, TURNING ON WILL REVERSE LOCO, UNCOUPLE AND MOVE AWAY ALL AT THE PRESS OF A KEY.
From the ESU Web Site:
The LokSound V4.0 recognises DCC, Selectrix® and the Motorola® protocol. It can be operated with 14, 28 or 128 drive steps or on analogue DC layouts in DCC mode.You can assign the decoders to 2-digit, 3-digit (1-127) or 4-digit (1-9999) addresses as well as a consist address.
LokSound V4.0 decoders are also able to operate on analogue DC and AC layouts.
Constant current of 1.1A continuous current.
The LokSound V4.0 works with 8 polyphonic channels, i.e. that the decoder is able to play up to 8 different sounds simultaneously, using the 16-Bit mixer and the nearly noiseless D/A convertor.
Function outputs: 4 amplified outputs max. 250mA load for each output