ESU 82483 V4 Class 2MT Ivatt 2 Cyl Steam DCC Sound Decoder 8 Pin South West Dig
- 1 in stock
ESU 82483 V4 Class 2MT 2-6-0 / 2-6-2 LMS / BR Ivatt 2 Cyl Steam DCC Sound Decoder 8-Pin with South West Digital sound.
(PLEASE NOTE SOUND DECODERS ARE THE RECORDINGS OF THE MENTIONED LOCO(S), YOU MAY NEED TO CHANGE THE SPEAKER TO FIT THE LOCO YOU ARE INSTALLING IT IN, SO PLEASE CHECK FOR AVAILABLE SPACE OR ENQUIRE BEFORE BUYING.)
F0 Lights On/Off
F1 Sound On/Off
F2 Whistle 1 Playable
F3 Whistle 2
F4 Buffer Up
F5 Shovelling Coal/Aux 1
F6 Safety Valve
F8 Drain Cocks
F10 Guards Whistle
F11 Flange Squeal
F12 Volume Control, Toggle On/Off
F13 Shunt Mode
F14 Aux 2
From the ESU Web Site:
The LokSound V4.0 recognises DCC, Selectrix® and the Motorola® protocol. It can be operated with 14, 28 or 128 drive steps or on analogue DC layouts in DCC mode.You can assign the decoders to 2-digit, 3-digit (1-127) or 4-digit (1-9999) addresses as well as a consist address.
LokSound V4.0 decoders are also able to operate on analogue DC and AC layouts.
Constant current of 1.1A continuous current.
The LokSound V4.0 works with 8 polyphonic channels, i.e. that the decoder is able to play up to 8 different sounds simultaneously, using the 16-Bit mixer and the nearly noiseless D/A convertor.
Function outputs: 4 amplified outputs max. 250mA load for each output