ESU 82882 V4 Micro Class 1F / 3F Jinty / 4F Steam DCC Sound Decoder 8 Pin South West Digital
- 1 in stock
ESU 82882 V4 Micro Class 1F / 3F Jinty / 4F Steam Loco DCC Sound Decoder 8-Pin with South West Digital sound
(PLEASE NOTE SOUND DECODERS ARE THE RECORDINGS OF THE MENTIONED LOCO(S), YOU MAY NEED TO CHANGE THE SPEAKER TO FIT THE LOCO YOU ARE INSTALLING IT IN, SO PLEASE CHECK FOR AVAILABLE SPACE OR ENQUIRE BEFORE BUYING.)
F0 Lights On/Off
F1 Sound On/Off (Slot 1)
F2 Whistle, Playable (Slot 3)
F3 Blower (Slot 21)
F4 Buffer Up (Slot 23)
F5 Shovelling Coal (Slot 5)/Aux 1 (Firebox LED)
F6 Safety Valve (Slot 12)
F7 Injectors (Slot 20)
F8 Drain Cocks (Slot 14)
F9 Coupling (Slot 8)
F10 On, Guards Whistle (Slot 10)
F11 Shunt Mode, CV 3/4 Off
F12 Master Volume Control, Toggle On/Off to change or leave On for Mute
From the ESU Web Site:
The LokSound V4.0 recognises DCC, Selectrix® and the Motorola® protocol. It can be operated with 14, 28 or 128 drive steps or on analogue DC layouts in DCC mode.You can assign the decoders to 2-digit, 3-digit (1-127) or 4-digit (1-9999) addresses as well as a consist address.
LokSound V4.0 decoders are also able to operate on analogue DC and AC layouts.
Constant current of 1.1A continuous current.
The LokSound V4.0 works with 8 polyphonic channels, i.e. that the decoder is able to play up to 8 different sounds simultaneously, using the 16-Bit mixer and the nearly noiseless D/A convertor.
Function outputs: 4 amplified outputs max. 150mA load for each output