DCC Sale

CB194 10 Metres Brown 32/0.2mm DCC Bus Wire 10 Amp High Quality Stranded Equipment Wire. Suitable for General use and Connection within Apparatus. Manufactured to DEF61-12 (Part 6), High Quality Stranded Equipment Wire, 1mm² Wire Size, 32/0.2mm Conductor Stranding, 2.55mm Cable Diameter, 1500Vrms Voltage Rating, Tinned Copper Conductor Material, PVC Insulation Material, DEF61-12, BS6746 Standards,…

CB195 10 Metres Blue 32/0.2mm DCC Bus Wire 10 Amp High Quality Stranded Equipment Wire. Suitable for General use and Connection within Apparatus. Manufactured to DEF61-12 (Part 6), High Quality Stranded Equipment Wire, 1mm² Wire Size, 32/0.2mm Conductor Stranding, 2.55mm Cable Diameter, 1500Vrms Voltage Rating, Tinned Copper Conductor Material, PVC Insulation Material, DEF61-12, BS6746 Standards,…

CB196 10 Metres Orange 32/0.2mm DCC Bus Wire 10 Amp High Quality Stranded Equipment Wire. Suitable for General use and Connection within Apparatus. Manufactured to DEF61-12 (Part 6), High Quality Stranded Equipment Wire, 1mm² Wire Size, 32/0.2mm Conductor Stranding, 2.55mm Cable Diameter, 1500Vrms Voltage Rating, Tinned Copper Conductor Material, PVC Insulation Material, DEF61-12, BS6746 Standards…

CB197 10 Metres White 32/0.2mm DCC Bus Wire 10 Amp High Quality Stranded Equipment Wire. Suitable for General use and Connection within Apparatus. Manufactured to DEF61-12 (Part 6), High Quality Stranded Equipment Wire, 1mm² Wire Size, 32/0.2mm Conductor Stranding, 2.55mm Cable Diameter, 1500Vrms Voltage Rating, Tinned Copper Conductor Material, PVC Insulation Material, DEF61-12, BS6746 Standards,…

CB198 10 Metres Yellow 32/0.2mm DCC Bus Wire 10 Amp High Quality Stranded Equipment Wire. Suitable for General use and Connection within Apparatus. Manufactured to DEF61-12 (Part 6), High Quality Stranded Equipment Wire, 1mm² Wire Size, 32/0.2mm Conductor Stranding, 2.55mm Cable Diameter, 1500Vrms Voltage Rating, Tinned Copper Conductor Material, PVC Insulation Material, DEF61-12, BS6746 Standards…

CB199 10 Metres Grey 32/0.2mm DCC Bus Wire 10 Amp High Quality Stranded Equipment Wire. Suitable for General use and Connection within Apparatus. Manufactured to DEF61-12 (Part 6), High Quality Stranded Equipment Wire, 1mm² Wire Size, 32/0.2mm Conductor Stranding, 2.55mm Cable Diameter, 1500Vrms Voltage Rating, Tinned Copper Conductor Material, PVC Insulation Material, DEF61-12, BS6746 Standards,…

DCC Concepts DCD-GS-MG Mimic Ground Signal Add on Pack (Pk12) - UK 4 Light 12x 2-wire 4 LED UK Modern Ground Signal – A pack of 12 x 4-lamp plug and play signals in 4mm scale (OO), supplied with NO control board. The DCD-MGS-MG is a modern UK 4-lamp ground signal that uses LEDS in the prototype. It was first introduced around 2000 and is now being used to replace many 3-light signals as they reach…

DCC Concepts DCD-GS-RG Mimic Ground Signal Add on Pack (Pk12) - UK 2 Light 12x 2-wire Red/Green Ground Signal – A pack of 12 x 2-lamp plug and play signals in 4mm scale (OO), supplied with NO control board. The DCD-MGS-RG is a simple design 2-lamp ground signal that was first seen on a limited basis in the 1920’s in the UK, but it was very widely used internationally. (This can be pulled up on the…

DCC Concepts DCD-LZX Cobalt Alpha Adapter Lenz The DCD-LZX is an adapter that translates the communication language of Cobalt Alpha to allow you to interface it directly with a LENZ DCC System. It is very simple to install -simply connect it to Cobalt Alpha, and then plug the other end into your Lenz DCC system command bus / X-bus.

DCC Concepts DCD-MGS-RG Mimic Ground Signal Pack (Pk12) & Controller- UK 2 Light ALPHA MIMIC 12x Red/Green Ground Signal – A pack of 12 x 2-lamp plug and play signals in 4mm scale (OO), complete with control board and accessories. The DCD-MGS-RG is a simple design 2-lamp ground signal that was first seen on a limited basis in the 1920’s in the UK, but it was very widely used internationally. (This…

CC Concepts DCD-MGS-US Mimic Ground Signal Pack (Pk12) & Controller- USA 2 Light ALPHA MIMIC 12x US-type Ground Signal – A pack of 12 x 2-lamp plug and play signals in HO scale, complete with control board and accessories. The DCD-MGS-US is a simple design 2-lamp ground signal – the prototype for this signal dates from pre-WW2 but has not changed significantly since then. It is commonly used in th…

DCC Concepts DCD-SA3-LG.3 Zen 3-Wire Large Stay Alive for Zen Black & Blue+ Decoders (3-Pack) A set of 3 large Stay-Alives with 3-wire connections to the decoder. Totally Plug and Play with Zen decoders. Usable with Zen Black, Zen Blue+, Lenz and ESU or any decoder with three-wire connections for Stay-Alive. Height 6mm Width 14mm Length 22mm Please note that connection of a DCCconcepts Zen Stay-Al…