Scenics

Ancorton Models NBR2 / 95641 Single Carriage Way Road Bridge Stone Built N Gauge The model is designed to be built into an embankment on each side of a wide and shallow river. It measures 100 mm long, 32 mm high at the parapet apex and 22 mm wide. This kit builds into a fabulous N scale model of a stone built, single track road bridge, suitable for crossing a small river. It is closely based on a…

Ancorton Models NBR4a / 95625 Four Arch Causeway / Viaduct Top N Gauge Dimensions 57 × 192 × 28 mm (or the viaduct top for NBR4b) Includes full colour assembly instructions

Ancorton Models NBR4b / 95626 Stone Viaduct Piers N Gauge Dimensions 65 × 15 × 93 mm (Three full piers and two end piers) Includes full colour assembly instructions

Ancorton Models NBR6 / 95624 Four Arch Road Bridge (Stone) N Gauge The model is designed to be built into an embankment on each side of a model river. It measures 130 mm long, 27 mm high at the parapet apex and 44 mm wide (at the butresses). This kit builds into a fabulous N scale model of a stone built, four arched, road bridge, suitable for crossing a small river. The main structure is laser cut…

Ancorton Models NES1 / 95654 Single Track Engine Shed N Gauge Measurements: 131 × 42 × 53 mm This kit assembles into a nicely detailed model of an N gauge single track engine shed, complete with vented roof. It has finely detailed arched window frames, a small side door, impressive double main doors and even a date plaque! This building is typical of many small engine sheds found all over the UK d…

Ancorton Models NF6 / 95685 Chain Link Fencing N Gauge 300mm Legnth With this kit you can create a very realistic 6ft high chain link fence in N gauge. This type of miniature fencing is a real challenge to get right, but take a little care during assembly and with this kit you can build a model to be proud of! The kit comes with laser cut wooden posts and these can be left either as wooden posts,…

Ancorton Models NF8 / 95687 Security Fencing Kit With Barbed Wire Top N Gauge makes 150 scale feet of 9ft high fencing This type of security fencing is often used to protect industrial sites and other sensitive areas. It has cast concrete posts about 7 feet high with an angled arm on the top, making the posts around 9 feet high in total. It normally has chain link fencing about 6 feet high and thr…

Ancorton Models NGS1 / 95653 Single Track Goods Shed Depot Stone Built N Gauge Dimensions 92 × 49 × 50 mm This kit contains laser cut wood and cardboard parts that assemble into a nicely detailed model of an N gauge Goods Shed, complete with interior platform and loading bay. This type of building was seen widely in station yards all over the UK during the steam era.

Ancorton Models NTM1 / 95647 Double Track Tunnel Mouth Portal N Gauge measures 53 mm (w) x 35 mm (h) at the arch apex. The actual width of the overall structure will vary depending on the final positioning of the embankment walls. The kit contains sufficient parts to build one tunnel mouth as shown This kit builds into an N scale model of a stone built, twin track tunnel mouth. The main structure…

Ancorton NTM2 Tunnel Mouth Single Track Laser-Cut Kit N Gauge NTM2 956-28 This kit assembles into a model of a nicely detailed N gauge single-track tunnel mouth, complete with interior detail and roof. Requires glue and paint to complete.

Ancorton Models NTM3 / 95627 Double Track Tunnel Mouth Portal With Short Interior Wall N Gauge Dimensions 55 × 32 × 47 mm This kit builds into an N gauge model of a stone built, twin track tunnel mouth with curved walls. The main structure is laser cut from plywood, with the interior tunnel wall` cut from card. A short section of the stone etched tunnel interior is included, along with full colour…

Ancorton N3-DP3 World War II Pill Box N Gauge 954-01 Ancorton N Gauge World War II Pill Box (Four sided - type 28) N3DP3 This ready to plant model is made using the latest 3D printing technology and then hand finished.