NEM Coupling Converters

GVNEM01 Conversion NEM Pockets For Bachmann, Hornby, Tri-ang (2 Pairs) These converters can be widely used in older model railway stock, including wagons and carriages, and can be found on various brands such as Tri-Ang, Wrenn, Bachmann, Mainline, Hornby, Cambrian and Parkside. Before using them, it's important to ensure that the coupler you choose fits the NEM pocket. Please check this before rem…

GVNEM02 Conversion NEM Pockets For Lima 3mm Pin (2 Pairs) These converters are designed to fit Lima Hopper wagons such as Yeoman PGA/ARC and Horsebox. The hole size required for these converters is approximately 3mm, allowing them to replace the outdated large D clip-in couplings. Please check the size of the hole on the chassis. To remove the old coupling, simply pull and release the clip. When f…

GVNEM03 Conversion NEM Pockets For Dapol, Airfix,Hornby (2 Pairs) These converters are widely used with older stock, including wagons and carriages, and can be found on well-known brands such as Hornby, Dapol, Dapol Kits, and Airfix. Before use, please ensure that your desired coupler fits the NEM pocket by checking it before removing a pocket from the sprue. Wagons or carriages typically have a p…

GVNEM04 Conversion NEM Pockets For Bachmann Bullied (2 Pairs) To accommodate the installation of the NEM pocket, a small channel needs to be created in the bogie beam where the old coupling is located. It is essential to maintain the pocket at a specific height to ensure compatibility with tension locks or Kadee couplers. The NEM pocket features U-shaped channels on either side, with the bottom of…

GVNEM05 Conversion NEM Pockets For Lima 4mm Pin (2 Pairs) These converters are designed to replace the Lima and Hornby big D coupling that clips in to a hole in the underside of the chassis on wagons,and vans. These have been tested on CCT and Lima milk tankers. Please check the size of the hole on the chassis. To remove the old coupling, simply pull and release the clip. When fixing the new NEM c…

GVNEM06 Conversion NEM Pockets For Hornby Seacow (2 Pairs) These converters are designed to replace the coupling on the Hornby Seacow wagon. For this wagon modification, you will need a sharp craft knife/cutters, needle files, superglue and a screwdriver. Begin by cutting the arm at the crease on the underside, as the arm angles downwards. Take care to make a clean cut. Next, tidy up the end of th…

GVNEM08 Conversion NEM Pockets For Lima Coach Bogies (2 Pairs) Based on the makers testing, they have found that these converters can be used to convert Mk1's, Mk2's, and Mk3's with a little bit of work. For those technically inclined, they are compatible with Lima - B1 Bogie, B4 Bogie, and BT10 Bogie. These models typically feature a similar moulding with a Big D type coupling. By using this conv…